Your donations help keep this valuable resource free and growing. Thank you.
|
'68 American radiator support |
Post Reply |
Author | |
68Ambler
AMC Apprentice Joined: Nov/04/2018 Location: Milwaukee Wi. Status: Offline Points: 98 |
Post Options
Thanks(0)
Posted: Nov/28/2018 at 7:42pm |
The radiator support on my '68 American suffered some abuse at the hands of the previous owner. Bent up pretty bad, and the lower left corner has been completely cut off, in order to cobble the radiator back in, I assume. Anyway, has anyone ever replaced just the support on these unibodies? Is it as simple as drilling out the spot welds and getting one off a donor car, or am I just better off trying to straighten the damn thing out and weld in a new piece of sheet metal on the corner? Any suggestions would be greatly appreciated. Thanks. Oh, I would post some pics, but I dont have enough posts yet.
Edited by 68Ambler - Nov/28/2018 at 7:48pm |
|
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
With some careful measuring... a little bracing...It is as easy as drilling the spot welds and replacing it .BUT i would only do it with the engine and tran`s removed...The shock towers will bend in due to the driveline weight...I have seen it then it becomes a real mess....
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
tufcj
Supporter of TheAMCForum Supporter of TheAMCForum Joined: Jul/10/2007 Location: Watkins, CO Status: Offline Points: 4085 |
Post Options
Thanks(0)
|
Changed the one on my 67. It was hit in the drivers corner and bent, including the frame rail. We removed everything from the trunnion tower forward, except the frame rail. We straightened the frame on a frame machine, and put on a donor core support from a 69. The spot welds round the front of the frame rail are tricky, but it's not that hard. I had a thread up w/pictures until Photobucket decided to change their policies. Bob tufcj
|
|
69 AMX
74 Javelin AMX 67 Rogue If you need a tool and don't buy it... you'll eventually pay for it... and not have it. Henry Ford |
|
mixed up
AMC Addicted Joined: Jun/16/2015 Location: Monroe mich Status: Offline Points: 2177 |
Post Options
Thanks(0)
|
you could always get a rad support from a another car weld a brace across the front to maintain the spread then piece it in if you don't want replace the whole thing
|
|
69 amx 290 auto
65 220 290 4spd 80 ford fairmont |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |