The AMC Forum : Parts needed for charity AMX http://theamcforum.com/forum/ This is an XML content feed of; The AMC Forum : Charity Projects : Parts needed for charity AMX Sun, 05 Feb 2012 06:38:07 +0000 Sat, 27 Feb 2010 09:35:07 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 9.69 360 theamcforum.com/forum/RSS_post_feed.asp?TID=3809 The AMC Forum http://theamcforum.com/forum/http://www.theamcforum.com/forum/skin_images_amc/forumheader.png http://theamcforum.com/forum/ Parts needed for charity AMX : what is left that is needed or... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=153491#153491 Author: amx39068
Subject: 3809
Posted: Feb/27/2010 at 9:35am

what is left that is needed or the car. I have a bunch of stuff and would be happy to donate some stuff to help get it finished.]]> Sat, 27 Feb 2010 09:35:07 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=153491#153491 Parts needed for charity AMX : Must be cabin feaver setting in....I... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=66014#66014 Author: sidewinder
Subject: 3809
Posted: Dec/28/2008 at 4:55pm

Must be cabin feaver setting in....I need a car fix!!!]]> Sun, 28 Dec 2008 16:55:53 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=66014#66014 Parts needed for charity AMX : Chuck, you are all wound up. Maybe... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=65914#65914 Author: 6768rogues
Subject: 3809
Posted: Dec/27/2008 at 9:01pm

Chuck, you are all wound up. Maybe you should switch to decaf!]]> Sat, 27 Dec 2008 21:01:10 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=65914#65914 Parts needed for charity AMX : Haven't seen any posts or... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=65903#65903 Author: sidewinder
Subject: 3809
Posted: Dec/27/2008 at 8:05pm

Haven't seen any posts or updates on the AMX's progress?   Has it stalled again?  Are you out of funds or parts?   I know winter in New England can really slow things up.  I think there are a lot of forum members that were fired up about this project.  Like anything else....out of site ...out of mind!   Post, post, post...ask for help....wish I was closer and could pitch in......  ]]> Sat, 27 Dec 2008 20:05:14 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=65903#65903 Parts needed for charity AMX : Originally posted by tbenvieHere... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=62648#62648 Author: whizkidder
Subject: 3809
Posted: Dec/05/2008 at 2:54pm

Originally posted by tbenvie

Here is an updated list of parts needed for the Hanna, the Charity AMX:

<snip>

Would like a radiator with the date code J9, K9, L9, A0, B0, C0. Damaged or not, as long as the top tank is good.
<snip>

 
Tom:  What is the correct part number?  I'm taking a radiator out of my 70 AMX due to a small seep at the bottom of the core -- but if it's the correct part number/date code, you can have it if you still need it.
 
Ron
]]> Fri, 05 Dec 2008 14:54:44 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=62648#62648 Parts needed for charity AMX : In caseyou haven&#039;t found... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=58147#58147 Author: 71SC360
Subject: 3809
Posted: Oct/26/2008 at 11:40am

In case you haven't found the air cleaner tub, here's one that on ebay right now.....
 
http://cgi.ebay.com/ebaymotors/AMC-AMX-1970-Ram-Air-cleaner-tub-No-Reserve-Javelin_W0QQitemZ250312872541QQcmdZViewItem?hash=item250312872541&_trksid=p4506.c0.m245&_trkparms=65%3A10%7C39%3A1%7C240%3A1318
]]> Sun, 26 Oct 2008 11:40:54 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=58147#58147 Parts needed for charity AMX : Originally posted by tbenvieYes,I... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57466#57466 Author: 71SC360
Subject: 3809
Posted: Oct/20/2008 at 6:27pm

Originally posted by tbenvie

Yes,I do need the screws for the taillights. Most of the fasteners for the car are missing. Thanks
 
Mark them off the list and I'll throw them in the next box of parts....
]]> Mon, 20 Oct 2008 18:27:45 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57466#57466 Parts needed for charity AMX : Yes,I do need the screws for the... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57454#57454 Author: tbenvie
Subject: 3809
Posted: Oct/20/2008 at 5:36pm

Yes,I do need the screws for the taillights. Most of the fasteners for the car are missing.

Fine Lines already donated the brake and fuel lines, but not the other ones.

Thanks]]> Mon, 20 Oct 2008 17:36:21 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57454#57454 Parts needed for charity AMX : The distributor vacuum line is... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57393#57393 Author: Ohio AMX
Subject: 3809
Posted: Oct/20/2008 at 11:02am

The distributor vacuum line is listed as being needed. Do you also need the rest of the hard lines for the fuel and brake systems? I would be happy to contact Fine Lines about donating these since I used to work there.

]]> Mon, 20 Oct 2008 11:02:30 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57393#57393 Parts needed for charity AMX : Joe I have the trim but no clip.... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57383#57383 Author: badx
Subject: 3809
Posted: Oct/20/2008 at 9:34am

  Joe       I have the trim but no clip. I have dropped that stuff off at Tom,s this morning.  Rick]]> Mon, 20 Oct 2008 09:34:36 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57383#57383 Parts needed for charity AMX : Rick, You already have the rain... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57382#57382 Author: 71SC360
Subject: 3809
Posted: Oct/20/2008 at 9:27am

Rick, You already have the rain gutter trim & clip? If so, I won't send those....]]> Mon, 20 Oct 2008 09:27:42 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57382#57382 Parts needed for charity AMX : Tom, I dropped off Driver side... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57379#57379 Author: badx
Subject: 3809
Posted: Oct/20/2008 at 8:30am

  Tom, I dropped off Driver side door,Correct exaust manifolds,Rechromed quarter trim,I have a new dash speaker donated by Arnie G., 1 hard style door pull and the rain gutter trim.   Rick J]]> Mon, 20 Oct 2008 08:30:17 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57379#57379 Parts needed for charity AMX : Do you need the bolts for the... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57341#57341 Author: 71SC360
Subject: 3809
Posted: Oct/19/2008 at 9:35pm

Do you need the bolts for the tail light housings? I thought I remember you saying that they were missing. Let me know because I found a bag full of those...]]> Sun, 19 Oct 2008 21:35:59 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57341#57341 Parts needed for charity AMX : Would prefer the 7 bladed optional... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57339#57339 Author: tbenvie
Subject: 3809
Posted: Oct/19/2008 at 9:30pm

Would prefer the 7 bladed optional flex fan

thanks-I'll look for those other parts]]> Sun, 19 Oct 2008 21:30:10 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57339#57339 Parts needed for charity AMX : Trunk area and under car parts... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57337#57337 Author: tbenvie
Subject: 3809
Posted: Oct/19/2008 at 9:27pm

Trunk area and under car parts needed:

Leaf springs and u-bolts

Idler arm

4 torque link bushings

Emergency brake cables-all

Trunk mat

Correct spatter paint

1 side marker light cover

Cap for inflator bottle

Trunk weatherstripping

Foam rubber pieces to hold rear harness in place


]]> Sun, 19 Oct 2008 21:27:56 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57337#57337 Parts needed for charity AMX : Tom, AMark has these reproduction…black... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57336#57336 Author: 71SC360
Subject: 3809
Posted: Oct/19/2008 at 9:25pm

Tom, 

AMark has these reproduction…black plastic hood release guide

 

 

I Sent these parts…Windshield washer bag clips (2), Correct nuts for hood hinges-need 8, Correct coil, Correct hose clamps-all, License plate light assy.  If you can't find them let me know and I will ship them again...

 
 
I still plan to send these parts.....Clamps for smog system hoses, Dip stick, Correct distributor cap, Correct “TS” headlights, Cap for inflator bottle, Rain gutter trim-right rear with clip. I have them just not boxed up yet...
 
Is the fan you are looking for a fixed fan or a flex style?
 
 


Edited by 71SC360 - Oct/19/2008 at 9:33pm]]> Sun, 19 Oct 2008 21:25:49 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57336#57336 Parts needed for charity AMX : Interior parts needed: Plastic... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57335#57335 Author: tbenvie
Subject: 3809
Posted: Oct/19/2008 at 9:22pm

Interior parts needed:

Plastic 4 speed floor hump

Roof rail weatherstrip-both sides

Door weather strips-both sides

Welting-covers the pinch weld around the doors. Also need both plastic end caps.

Armrest repaired-have 3-doesn't someone repair these?

Black plastic door locks

Plastic seat backs and lower side seat trim for driver's side (small version)

AMX emblem for steering wheel and metal center section

Handle for emergency brake-70 style

Clutch and brake pedal pads

Electric wiper switch assy (donated one has missing connector)

One door pull-hard rubber style

Complete dash crash pad

Sunvisors

Headliner

Vinyl covers for interior windshield posts with clips and screws

Dash speaker

Shift handle needs to be rechromed

Vinyl roof rail trim

Trim around rear window-top and bottom piece and two side "J" shaped parts

Plastic trim under rear quarter window with push in rear button.

One seat belt buckle in black. Also need bolts. Would like them reconditioned as well.

Repair clock

Ashtray

Glove box liner

Floor pan patch panels-left and right rear

Both door light switches (driver's one is a GM part)

Rear view mirror assy

just about every screw, nut, or bolt for the interior parts

Edited by tbenvie - Oct/19/2008 at 9:28pm]]> Sun, 19 Oct 2008 21:22:10 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57335#57335 Parts needed for charity AMX : Exterior Body Needs: All four... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57333#57333 Author: tbenvie
Subject: 3809
Posted: Oct/19/2008 at 9:15pm

Exterior Body Needs:

All four marker lights and correct screws

2 directional light housings, one lens and 2 bulbs. I need the housings with the prongs on the back, not the wires. Here is a picture of the housing with the wire and the push in plug that we need.

Left and right horns

2 small bumper bolts for ends of front bumper

2 360 emblems

Clips for windshield and rear window surround stainless trim

Rain gutter trim-right rear with clip

Quarter window trim-left and right (chrome mounts on top of quarter panel). Also need one clip and both screws

License plate light assy.

Decklid-no rust only

Need a 70 door, left side. Can trade a mint 68 door.

Needs a windshield-tinted

Need taillight housings chromed

need hood trim and headlight door trim chromed

Complete wheel assys-lug nuts, center caps (have retainers), trim rings. Need 4 correct wheels-can trade for the 7 inch Ford ones on the car.

Correct “TS” headlights

Needs retaining nuts and washers for the wiper linkage. need the linkage and parts to attach it to the motor.

Correct machine screws for the headlight doors

Trunk lock and retainer assy.

One upper door hinge windstop and retainer

Front license plate bracket



]]> Sun, 19 Oct 2008 21:15:09 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57333#57333 Parts needed for charity AMX : Here is an updated list of parts... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57330#57330 Author: tbenvie
Subject: 3809
Posted: Oct/19/2008 at 9:04pm

Here is an updated list of parts needed for the Hanna, the Charity AMX:

Under the hood:

Correct 1970 log style exhaust manifold drilled for smog tubes.

Smog tubes-both sides and nozzles and washers

Need heat riser.

Ram air parts-need everything except the “Y” duct and hood chrome parts (need over air cleaner with foam and solenoid, hood inserts)

Would like a radiator with the date code J9, K9, L9, A0, B0, C0. Damaged or not, as long as the top tank is good.

7 bladed fan

Correct 70 air cleaner housing with element-have snorkel and lid. Need wing nut

Black heater hose to water pump

Accelerator cable

Accelerator cable bracket that mounts on the engine intake manifold

Heater control cable

Clamps for smog system hoses

Smog pump fan belt

High pressure power steering hose (this has the fittings on either end)

Vacuum advance hard formed line

Cowl weatherstrip and metal retainer and screws

Radiator cap

Power steering pump rebuild kit

Correct battery

Correct nuts for hood hinges-need 8

Dip stick

Fuel line clamp at valve cover

Vacuum advance assy (single diaphram)

Correct distributor cap

Correct coil

69-70 heater motor (68 is on the car)

Windshield washer pump

Windshield washer bag clips (2)

Outer grill backets-lower brackets, not the ones that mount to the upper core support (have all 4 of those)

Both horns

Hood release linkage parts-black plastic and rod that goes through it

Correct style battery

Correct battery cables and starter cable

One undented valve cover

White and black wire looms-NOS please

Date coded plug wires

Correct hose clamps-all



]]> Sun, 19 Oct 2008 21:04:58 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=57330#57330 Parts needed for charity AMX : You&#039;ll be happy to hear that... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=54789#54789 Author: farna
Subject: 3809
Posted: Oct/01/2008 at 7:37pm

You'll be happy to hear that the remainder of the General Fund I've been keeping for the car has been turned over to Tom then. I sent a vote out to all the committee members on this to make sure they were aware of it. I was pretty sure everyone would say to hand it over since Tom will be finishing the car. There's no longer a need for any central fund. The last thing I paid for was a token amount plus S&H for the items Eddie sent. I didn't get a reply from several members. Tom rarely returns an e-mail, but I think I knew what his vote would be (may surprise some of you, but same as mine)! As soon as I got a definite majority I sent the money to the PayPal account Tom set up. Rick had mentioned it was needed for paint supplies, but check with the local paint suppliers first!
]]> Wed, 01 Oct 2008 19:37:50 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=54789#54789 Parts needed for charity AMX : Well, Its nice to keep recieving... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=53711#53711 Author: badx
Subject: 3809
Posted: Sep/24/2008 at 10:15am

  Well, Its nice to keep recieving donations and letting the forum members no. I just recieved the new  trendsetter exaust from Mike and Steve Bursaw. They are great guys and anyone needing things they sell should definately get in touch with them at  Javelinreproductions@hotmail.com  A big thanks for this donation just like all of them.  We still need people to step up so please help however you can.  Thanks Rick J]]> Wed, 24 Sep 2008 10:15:14 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=53711#53711 Parts needed for charity AMX : I would just like to say A big... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=53670#53670 Author: badx
Subject: 3809
Posted: Sep/23/2008 at 9:51pm

I would just like to say A big thanks to Rich Corsello for his efforts to get us the tired from Kelsey tire. These are awesome and will look great on the car. Thanks Rich.
 
   I would also like to thank Eddie Stakes for his generous donation with the ram air trim, nos AMC emblem for the rear panel, stainless chin spoiler and the door moisture barriers for the car. I tried his ram air trim out tonite and they seem like with little effort they will fit nice. Thanks Eddie and we hope all is O.K after the hurricane.     Rick J


Edited by badx - Sep/23/2008 at 9:53pm]]> Tue, 23 Sep 2008 21:51:46 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=53670#53670 Parts needed for charity AMX : Just wanted to take a minute... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=53300#53300 Author: Ram Air Rick
Subject: 3809
Posted: Sep/21/2008 at 7:06am

 
Just wanted to take a minute here, to say that I heard from Rick J. yesterday,and the set of  reproduction Goodyear Polyglas  E-70-14 (RWL) tires ,arrived in good condition yesterday ,that Kelsey Tire generously donated for "Hannah" Charity AMX.
 
I also wanted to point out how quickly and selflessly, John Kelsey (owner) and his very able assistant "Peggy" were, to help this cause.
 
I have dealt with Kelsey Tire in the past,and from my first dealing with them,was very impressed! They know how to give their customers satisfaction,and it's through outstanding service and high quality products!(I know because my Kelsey tires have been punished and keep coming back for more LOL !!!)
 
Now,they  didn't ask me to write this,it's just what I think ,and thought you should know too.
 
If you do have a need for reproduction tires for your project,you will not go wrong with Kelsey Tire.
 
Much Thanks to all the fine people at Kelsey Tire !
 
Sincerely,
Rich Corsello
 
 
]]> Sun, 21 Sep 2008 07:06:15 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=53300#53300 Parts needed for charity AMX : CRAP! I saw some GOOD clean blower... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52754#52754 Author: billd
Subject: 3809
Posted: Sep/16/2008 at 9:21am

CRAP! I saw some GOOD clean blower motors and decent seat belts that seemed to me to be 1970 style last weekend. OMG, my bad - I didn't print the list and take it with.]]> Tue, 16 Sep 2008 09:21:33 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52754#52754 Parts needed for charity AMX : Tom, I&#039;ve got a box going... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52752#52752 Author: 71SC360
Subject: 3809
Posted: Sep/16/2008 at 8:21am

Tom, I've got a box going out today. Unfortunately the blower motor I picked up is junk. I didn't check it out when I picked it up. It was frozen so I took it apart and it was badly rusted inside. Even though it looked good from the outside, all of the steel internals (and part of the case) were shot. I'll keep looking for other parts on the list. I'll check out Larry V's AMC junk yard this week for some of the items. I should be able to come up with more.....]]> Tue, 16 Sep 2008 08:21:35 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52752#52752 Parts needed for charity AMX : I will post an updated list this... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52731#52731 Author: tbenvie
Subject: 3809
Posted: Sep/16/2008 at 5:58am

I will post an updated list this weekend of what we still need.  I must say I am a little disappointed we have not had a better response for some of the smaller items.  I know all you AMC guys are parts hoarders and probably have multiples of what we need.

 

We received a set of correct wheels yesterday from a loacl guy and Rich Corsello has come through in a HUGE way-he convinced Kelsey tire to donate a set of E70 x 14 Goodyear RWL tires!!  A local tire store has agreed to dismount the old tires from the wheels so we can clean them up, then mount and balance the new ones for us.

 
We really need correct 70 seatbelts-all of them, and an aircleaner base (have the snorkle and cover) and some ram air parts.  If you don't want to donate them, what do you want for them?
 
There was a work party on the car last Saturday, and another this Saturday.  I haven't had a chance to post pics yet.  The cruise was rained out Friday, but we will be there this Friday as the weather is supposed to be great.
 
And the Pats won without Brady (I am still predicting 12-4 for the season-or better) and the Sox are back in first AND there is an AMX back in my garage.  Life is good!
]]> Tue, 16 Sep 2008 05:58:55 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52731#52731 Parts needed for charity AMX : Hi Chuck, Still need center piece... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52678#52678 Author: badx
Subject: 3809
Posted: Sep/15/2008 at 7:14pm

  Hi Chuck,  Still need center piece with the emblem. The wheel came out super nice from Rimblo buddy as I recieved it today,  Rick]]> Mon, 15 Sep 2008 19:14:15 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52678#52678 Parts needed for charity AMX : Do you have a center piece with... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52676#52676 Author: sidewinder
Subject: 3809
Posted: Sep/15/2008 at 6:56pm

Do you have a center piece with the emblem yet?  I have been watching E-bay for one and just missed getting one a few days ago.  There's one on there now but it's the entire wheel and a bit pricey....]]> Mon, 15 Sep 2008 18:56:13 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52676#52676 Parts needed for charity AMX : RimBlo has been recieved and looks... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52630#52630 Author: badx
Subject: 3809
Posted: Sep/15/2008 at 11:56am

    RimBlo has been recieved and looks awesome.  A big thanks to Dave Prine at rimblo buddy for donating his services. Thanks Dave. We all need to promote his services as he does Great work.  Rick J]]> Mon, 15 Sep 2008 11:56:50 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=52630#52630 Parts needed for charity AMX : I sent a box of odds n ends (bunch... http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=51771#51771 Author: KermitDRambler
Subject: 3809
Posted: Sep/08/2008 at 8:35pm

I sent a box of odds n ends (bunch of hardware and some foam parts i don't need) out over the weekend. Tom should have it Wednesday.
 
Matt
]]> Mon, 08 Sep 2008 20:35:08 +0000 http://theamcforum.com/forum/forum_posts.asp?TID=3809&PID=51771#51771