Your donations help keep this valuable resource free and growing. Thank you.
|
Harbor Freight Blasting Cabinet Review |
Post Reply | Page <1 234 |
Author | |
RamblinMan
AMC Addicted Joined: Sep/26/2007 Location: Port Charlotte Status: Offline Points: 1237 |
Post Options
Thanks(0)
|
Yeah, that's what I did. Thought it was too high, but I could lift it just enough. Built a skid with wheels to get it around back of the shed. This thing is rated at 21 CFM @ 100 PSI and it's built like a freakin tank! SWEET!
|
|
The Right Reverend of Blessed Acceleration
|
|
amundaza
AMC Apprentice Joined: Oct/15/2008 Location: Rochester Hills Status: Offline Points: 166 |
Post Options
Thanks(0)
|
Glad you gave it a try and it worked out for you! Blast away, Mr. Sand Blaster!
|
|
Sincerely,
Greg Taylor |
|
heyjavelin
Supporter of TheAMCForum Joined: Mar/08/2011 Location: Novi Michigan Status: Offline Points: 28 |
Post Options
Thanks(0)
|
I have been using a HF cabinet in the shop for three years and it has held up well. On my third light bulb and have gone thru about 50 tear-offs. When the cabinet was new I had a number of leak problems then I hooked up a shop vac to the air outlet on the right side of the cabinet and I put an automotive air filter over the inlet port on the back (cover by a 4" plastic plug). This has stopped all the leaks and made it much easier to see when blasting. After about an hour of use I dump the blast media from the shop vac back into the blaster and keep on shooting.
|
|
nali
Supporter of TheAMCForum Joined: Oct/30/2008 Location: Montreal , Can. Status: Offline Points: 984 |
Post Options
Thanks(0)
|
No more car :)
Maybe a 1965 Ambassador Coupé someday .. If I can find a cheap one. |
|
Johnny Javelin
AMC Fan Joined: Nov/18/2010 Location: Rochester N.Y. Status: Offline Points: 11 |
Post Options
Thanks(0)
|
One thing to remember when blasting Aluminum wheels, if you plan on polishing any of the surfaces afterwards,DO NOT Blast them! I cleaned some wheels the same way then took them to a Machine shop that specializes in metal polishing and the Guy there advised me not to do that because the surface gets too distorted and cannot be polished correctly. As usual I had to learn the hard way, so I thought I would pass it along so someone else dosen't have to
|
|
jeremy0711
AMC Addicted Joined: Dec/12/2008 Location: Southern IN Status: Offline Points: 1547 |
Post Options
Thanks(0)
|
you could blast your aluminum with baking soda.
I have my cabinet hooked up to a Delta dust vac for a wood shop. I bought a slide valve for control the suction. I rewired the lights and use outdoor house lighting inside it that has heavy duty glass shelding. I also use old house window panes and cut them down for the window instead of plastic. I have plenty of pvc leads to each side of the garage with regulators and moisture traps to each hose reel. I am also using an 80 gallon Quincy comprssor. I could use a new gun as the tips suck to find. I have been using old metal line fittings from old projects as tips and they work great and last just as long and would cost less too. |
|
Post Reply | Page <1 234 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |