Your donations help keep this valuable resource free and growing. Thank you.
|
78 Concord Wagon Update |
Post Reply | Page <1 891011> |
Author | |
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19679 |
Post Options
Thanks(0)
|
AMC must have left the lines over on the right because that's where the BW tranny lines were. You'd think they would have changed them since there had to be some change anyway. Maybe left them over there to allow more clearance around brake lines and steering components, or prevent confusing with brake and PS lines???
|
|
Frank Swygert
|
|
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
Was Back on the car today...Jr. started the car https://www.youtube.com/watch?v=LEOS4xg5Nlg
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
motorhead_1
AMC Addicted Joined: Apr/16/2014 Location: AZ Status: Online Points: 1006 |
Post Options
Thanks(0)
|
great little project!
what headers and what's the rear end out of? did you have to narrow it to fit?
|
|
69 SC/Rambler tribute 401/th400, 68 Rebel SST LSA, 66 F100 460/c6, 88 Merkur Xr4Ti, 71 Jaguar XJ6 LS1, 08 Supercharged Tundra
|
|
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
The headers are Hooker Competion headers...My son tig`ed them for me and i made them into dog leg....The rear is from a 01 Explorer i did the 1 tube 3 inch narrow...It should work perfectly for his application...373..posi.31 spline disc brakes....I finally finished all the wiring last week...That took 2 years...It`s funny because i do that type of work almost daily...The carb we used was on one of Richie Zuhls cars back in the 70`s it was set up for full throttle launches i redid the accelerator circuit thats why i keep wacking the throttle in the video https://www.youtube.com/watch?v=F02SEVQv4ak
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
LakesideRamblin
AMC Addicted Joined: Dec/21/2015 Location: So. California Status: Offline Points: 2692 |
Post Options
Thanks(0)
|
Super nice work! Congrats to you and Jr. and thanks for the post and videos.
|
|
LakesideRamblin
69 Rambler 360 73 Javelin 360 "If you could kick the person in the pants responsible for most of your trouble, you wouldn't sit for a month." T. Roosevelt |
|
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
First Test Drive...Smoked the slicks for 75 feet....Getting Closer https://www.youtube.com/watch?v=EhuZRnqgFas
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
Getting back on the Concord.... https://www.youtube.com/watch?v=s45vRJyiZKA&t=40s
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
Color sanding the body...a short edited video https://www.youtube.com/watch?v=bXB-sPFXzWQ&feature=youtu.be
|
|
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
|
Post Reply | Page <1 891011> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |