Your donations help keep this valuable resource free and growing. Thank you.
|
AMC Shorty Headers From Pertronics |
Post Reply | Page <1 151617 |
Author | |
SirDigger
Supporter of TheAMCForum Joined: May/23/2012 Location: Germany Status: Offline Points: 2455 |
Post Options
Thanks(0)
|
I dont have the Heatriser.. t
he Car came with Hedmen Headers.. so i hunt a matching seal ring at the moment. An other Problem I figured out. The Hedmens bbqed my Starter, so i ordered an replacement Powermaster Ultra Torque geared Starter.. The Freeflows will BBQ the Magnet Switch of the Powermaster... *DAMN* so back to original again... |
|
SirDigger&his german Friends are looking for Parts http://theamcforum.com/forum/the-german-amc-forum-ambassadorsirdigger-needs_topic83570.html
1970 Javelin SST 304 1970 Javelin SST 360 |
|
THE MENACE
AMC Addicted Joined: Nov/04/2008 Location: So. California Status: Offline Points: 4438 |
Post Options
Thanks(0)
|
You mean that starter can't be clocked to move the solenoid down away from the collector?
|
|
Former Owner of:
The Craig Breedlove "AERO AMX" Still Owner: SS/AMX #9 replica (THE BIG MENACE) 70 AMX 416, EFI, Nash 5 speed 70 Javelin 401, 727 (Wife's car) 72 Gremlin Autocross Project. |
|
SirDigger
Supporter of TheAMCForum Joined: May/23/2012 Location: Germany Status: Offline Points: 2455 |
Post Options
Thanks(0)
|
Dennis i can clock it, 3 Positions with minimal Change with the solenoid up,
or one Pos Solenoid down... that hangs as low as the Hedmenheaders i just get rid of. And sill try to get this seal ring Everything availeble in european metric Stuff is too small or too big.. Summit plays dumb and the local Pertronix Distributor doesnt answer his Phone. |
|
SirDigger&his german Friends are looking for Parts http://theamcforum.com/forum/the-german-amc-forum-ambassadorsirdigger-needs_topic83570.html
1970 Javelin SST 304 1970 Javelin SST 360 |
|
THE MENACE
AMC Addicted Joined: Nov/04/2008 Location: So. California Status: Offline Points: 4438 |
Post Options
Thanks(0)
|
That exhaust seal you have pictured above should be a Rol #EG24841. You can also use GM #15522434.
The gear reduction starter I have on my AMX can be clocked just about any position to get the solenoid where you need it to be. Dennis Edited by THE MENACE - Jul/28/2015 at 11:05am |
|
Former Owner of:
The Craig Breedlove "AERO AMX" Still Owner: SS/AMX #9 replica (THE BIG MENACE) 70 AMX 416, EFI, Nash 5 speed 70 Javelin 401, 727 (Wife's car) 72 Gremlin Autocross Project. |
|
SirDigger
Supporter of TheAMCForum Joined: May/23/2012 Location: Germany Status: Offline Points: 2455 |
Post Options
Thanks(0)
|
I hope I´ll found the correct ones as a FelPro 60718.
|
|
SirDigger&his german Friends are looking for Parts http://theamcforum.com/forum/the-german-amc-forum-ambassadorsirdigger-needs_topic83570.html
1970 Javelin SST 304 1970 Javelin SST 360 |
|
THE MENACE
AMC Addicted Joined: Nov/04/2008 Location: So. California Status: Offline Points: 4438 |
Post Options
Thanks(0)
|
That Felpro number (60718) crosses over to the GM number I posted so you should be good to go! Dennis |
|
Former Owner of:
The Craig Breedlove "AERO AMX" Still Owner: SS/AMX #9 replica (THE BIG MENACE) 70 AMX 416, EFI, Nash 5 speed 70 Javelin 401, 727 (Wife's car) 72 Gremlin Autocross Project. |
|
Post Reply | Page <1 151617 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |