Your donations help keep this valuable resource free and growing. Thank you.
|
lower radiator hose inner spring size? |
Post Reply |
Author | |
Dave Z
AMC Nut Joined: Jul/02/2007 Location: Massachusetts Status: Offline Points: 300 |
Post Options
Thanks(0)
Posted: May/22/2018 at 6:35pm |
What size is correct for a V8 lower rad hose?
https://www.summitracing.com/parts/ear-773410erl https://www.summitracing.com/parts/ear-773412erl Dave Z |
|
Dave Z
AMC Nut Joined: Jul/02/2007 Location: Massachusetts Status: Offline Points: 300 |
Post Options
Thanks(0)
|
I thought AN fittings went by 1/8ths but they in fact go by 1/16ths. So what I ended up getting was
https://www.summitracing.com/parts/ear-773420erl It was still too small but the biggest Earl's offers. I took the spring and twisted it to make it a little larger, should do the trick. Dave Z |
|
Trader
AMC Addicted Joined: May/15/2018 Location: Ontario Status: Offline Points: 6884 |
Post Options
Thanks(0)
|
If you want one to last, make your own.
Take a 36" length of 3/32" 309 or 316 tig wire and wrap it around a 1" pipe. Take the ends and turn 90° inside so they don't cut into the hose. It will spring back to just enough to get in. Last past our lifetimes.
|
|
Shannock
AMC Nut Joined: May/23/2016 Location: Rhode Island Status: Offline Points: 412 |
Post Options
Thanks(0)
|
The spring is 12" long and 1 1/4" diameter. |
|
Tom Davies
Rhode Island 1971 Javelin SST |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |